All MetalShaping

All MetalShaping (https://allmetalshaping.com/index.php)
-   Introductions (https://allmetalshaping.com/forumdisplay.php?f=7)
-   -   1968 Ford XT Falcon Ute Restoration (https://allmetalshaping.com/showthread.php?t=9344)

Damian Shepo 08-05-2013 07:13 AM

1968 Ford XT Falcon Ute Restoration
 
Hi All,
I've just started restoring a Ford Falcon Ute and knowing nothing about cars and sheetmetal fabrication I thought I'd better do some research on what tools I'll need to get the task done. It looks like I'll need a Bead Roller and an English Wheel so this site looks like a good place to start

HEATNBEAT 08-05-2013 09:05 AM

Hi Damian and welcome!:)
Post some pictures, so we can see what you need to do!:)

Peter Tommasini 08-05-2013 05:14 PM

HI Damian welcome to the forum
Peter

Damian Shepo 08-05-2013 05:30 PM

Pictures of the Ute and The first part I want to tackle
 
3 Attachment(s)
[ATTACH]Attachment 22932

Attachment 22933

Attachment 22934[/ATTACH]Car has a bit of rust but hoping with some blood sweat and lots of tears I should be able to bring it back to life


All times are GMT -5. The time now is 06:30 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.