All MetalShaping

All MetalShaping (https://allmetalshaping.com/index.php)
-   Software for Metalshaping (https://allmetalshaping.com/forumdisplay.php?f=61)
-   -   1948 Chevy tailgate logo hammer form (https://allmetalshaping.com/showthread.php?t=15042)

James. V. D. W 03-14-2016 06:01 AM

1948 Chevy tailgate logo hammer form
 
This is a hammer form I drew up in Solidworks 2013 for a 1948 Chevy tail gate. It is by no means perfect, but close enough to fool the naked eye. It may require some sanding as this was done mostly freehand, but will get you in the ball park. Could be used with a cnc router or laser cutter. I have no idea how to upload the .sldprt file here, so if any one needs this, pm me with your email address and I will forward it to you.

http://www.metalmeet.com/forum/attac...1&d=1457947340

James. V. D. W 10-02-2016 05:10 AM

2 Attachment(s)
Finally got my machine up and running after more than 2 years. I machined the hammer form out of 21mm marine ply in reverse. I decided against a thin mdf so it would last longer.


All times are GMT -5. The time now is 07:00 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.