HD tank no tank.
5 Attachment(s)
I need to make a design for the tank. Modeling from foil or some material. I do not want to use foam or polystyrene. Can you advise? I thought I was just making it out of do my memory, but I must have to more prepare the course for a little bit more. I see it will be more complicated. Do we have Any advice for approximate designing? I just need to prepare indicate that shape.
My creative power will be working next after. :) Attachment 47897 Attachment 47898 Attachment 47899 Attachment 47900 Attachment 47901 |
Jeroslav, I'd consider a Bert Buck (named after the inventor Ken Burt RIP). Some photos in post. Scroll down to post # 26
http://allmetalshaping.com/showthrea...ht=deco&page=3 |
2 Attachment(s)
Jaroslav, I'm currently making a tank for a Ducati using a wireframe. I'm using 5.0mm bright steel rod.
Attachment 47902 Attachment 47903 |
I had to go out to my shop to see if one of my wireform bucks was missing.
|
I'll try something. I was thinking of some wire mesh or foil. I thought it would be easier. Work and work.
Richard. Divide the tank through the bulkheads so that the shock wave does not turn motorbike in the curve. |
Quote:
Looking forward to seeing your progress. |
What I did work one day, I destroyed another day. I underestimated the preparation and course of the curves. I will send way.:mad::confused:
|
Quote:
I'm interested in seeing your tank for the Ducati. I have a 1994 Ducati 900 SS that I have modified quiet a bit, I would like to see how the tank design fits with the rest of the bike style. Bill |
Quote:
|
Solid Worx from Paper.
6 Attachment(s)
I took the paper and made the model. The course of the shaping option is clearer. What will be the result? That's really a question. I used Solid Worx from Paper.
Attachment 47939 Attachment 47940 Attachment 47941 Attachment 47942 Attachment 47943 Attachment 47944 |
All times are GMT -5. The time now is 12:18 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.