All MetalShaping

All MetalShaping (https://allmetalshaping.com/index.php)
-   Basic questions and answers (https://allmetalshaping.com/forumdisplay.php?f=13)
-   -   panel reading for metal finishing (https://allmetalshaping.com/showthread.php?t=10894)

David Ward 09-28-2018 08:18 AM

I know this thread is old, but as a sticky, prob read quite a bit.
My take on using a gloved hand or paper towel is that, it’s good to try it both ways to get a feel for the panel. Sometimes the texture of the panel lies to your senses, this is where a towel or glove can help. Kind of like a new set of eyes for your hands. The temperature of the panel can trick you, if you’re using any heat creating meathods for straightening. Dust, and primer / no primer spots, can trick you, as well. Use what works, and don’t be afraid to try something new. Your final results will tell you.

69rrbruce 10-04-2021 05:27 PM

Tinman Technologies has many vixen files from 7T to 20T. Which would you all suggest works the best for this process?


All times are GMT -5. The time now is 03:42 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.