All MetalShaping

All MetalShaping (https://allmetalshaping.com/index.php)
-   Introductions (https://allmetalshaping.com/forumdisplay.php?f=7)
-   -   New to Metal Shaping (https://allmetalshaping.com/showthread.php?t=17337)

tallwelder 11-17-2017 02:33 AM

New to Metal Shaping
 
Hi all,

I'm Carl from Wichita, KS, My reason for joining Metal Shaping is to learn to make things from sheet metal that look like they were made, not found. I've been a welder/fabricator for many years and am semi retired. Sheet metal forming was rarely asked of Me and when it was I was slow and always required assistance from someone with experience, I have done just enough to desire more knowledge. Finally I'm approaching the part of My life where I should have the necessary time to begin learning.

Peter Tommasini 11-17-2017 05:24 PM

Hi Carl welcome to the forum
Peter

crystallographic 11-18-2017 12:36 AM

Quote:

Originally Posted by tallwelder (Post 141303)
Hi all,

I'm Carl from Wichita, KS, My reason for joining Metal Shaping is to learn to make things from sheet metal that look like they were made, not found. I've been a welder/fabricator for many years and am semi retired. Sheet metal forming was rarely asked of Me and when it was I was slow and always required assistance from someone with experience, I have done just enough to desire more knowledge. Finally I'm approaching the part of My life where I should have the necessary time to begin learning.

Hi Carl,
Welcome to the forum.
(Some of us sheet metal guys are slow welders and require assistance....:rolleyes:)
Wichita has a lot of aviation going on, over the years.


All times are GMT -5. The time now is 02:34 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.