All MetalShaping

All MetalShaping (https://allmetalshaping.com/index.php)
-   Metalshaping videos on-line (https://allmetalshaping.com/forumdisplay.php?f=57)
-   -   Links to free metalshaping videos (https://allmetalshaping.com/showthread.php?t=6748)

Kerry Pinkerton 08-22-2012 06:46 AM

Links to free metalshaping videos
 
Post links in this thread and we'll periodically update this master listing.

MetalMan Sweden's (Per) videos:

Number 1: http://www.youtube.com/watch?v=dM3NG...hannel&list=UL

Number 2: http://www.youtube.com/watch?v=BHmiS...hannel&list=UL

Number 3: http://www.youtube.com/watch?v=6pFk_...hannel&list=UL

Number 4: http://www.youtube.com/watch?v=vIPZU...&feature=g-upl

Number 5: Making a blister... http://www.youtube.com/watch?v=GfEFz...ature=youtu.be

Number 6: Smoothing panels: http://www.youtube.com/watch?v=K8_FP...ature=youtu.be

Number 7: Cutting holes, flaring openings: http://www.youtube.com/watch?v=ja6F2...ature=youtu.be

Number 8: Tig Welding: http://www.youtube.com/watch?v=f10iVXAtRPg&feature=plcp

Number 9: MetalFinishing welds: http://www.youtube.com/watch?v=X8PDyAy83Vk&feature=youtu.be

Tuck Shrinking by Kris Pinkerton

http://www.youtube.com/watch?v=mkaCJ5gC3jI

Reverse curve panels with a Hot Dog Die by Kerry Pinkerton:

http://www.youtube.com/watch?v=q3bom1USglo

Tuck Puck videos by Carey Culpepper

#1 http://www.youtube.com/watch?v=KEgnR...&feature=g-upl

#2 http://www.youtube.com/watch?v=oShUN...&feature=g-upl

#3 http://www.youtube.com/watch?v=KRmY9...feature=relmfu

#4 http://www.youtube.com/watch?v=vw7--...feature=relmfu


Tuck Puck videos by Jacob Hunsinger

Shrinking using a stump: http://www.youtube.com/watch?v=7-cIDfe0FfE

Making a reverse using a stump: http://www.youtube.com/watch?v=DK1W7dhhCLA

metalman sweden 08-27-2012 01:30 AM

Metalshaping tricks # 5
 
Ok guys, Itīs time to relese Metalshaping tricks # 5

It shows a easy way to make teardrop shaped impressions in steel, itīs just a little show off how it can be done, more of a " idea spinner" to start the creative power of all members here...

The shape can be.......any you like!!

Here is the link:

http://www.youtube.com/watch?v=GfEFz...ature=youtu.be

Enjoy!

mr.c 08-27-2012 06:00 AM

The original TuckPuck Instructional Video's
 
I am in the slow process of producing new HD videos and will post the links as each section is posted. The new ones will add information that i have learned after putting out these videos. The section on mounting the TuckPuck is incorrect in these videos. The TuckPuck "must" be mounted on a solid surface and used with a mallet with a lot of mass. Here are the old ones About 6 years old):

http://www.youtube.com/watch?v=KEgnR...&feature=g-upl

#2 http://www.youtube.com/watch?v=oShUN...&feature=g-upl

#3 http://www.youtube.com/watch?v=KRmY9...feature=relmfu

#4 http://www.youtube.com/watch?v=vw7--...feature=relmfu

metalman sweden 09-18-2012 07:07 AM

Metalshaping tricks # 6 is here!
 
Hi folks!

Hard to end up with smooth panels? here is a really old trick!

http://www.youtube.com/watch?v=K8_FP...ature=youtu.be

Take care!

Jacob 09-18-2012 11:16 AM

I did a couple using a wooden stump.


All times are GMT -5. The time now is 06:54 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.