Quote:
Originally Posted by Peter Tommasini
Rob as mention before simply turn the sides down using a pipe with the right radius turn the sides a bit at the time till you get to the right angle, ... tuck shrink the corner down as you move the sides down. Make sure to have excess metal so you can have a bit of handle to turn the shorter side down.... but have the right amount of metal on the corner so you can tuck shrink (using a wooden stump) , then cut the shorter side to suit , wheel the top to suit and you should be OK.
Peter
|
Thanks Peter
. I started one this method last night and plan to try and finish it after work tonight.
IMG_20190403_100849932.jpg