View Single Post
  #8  
Old 11-04-2012, 12:16 PM
Dutch Comstock Dutch Comstock is offline
Member
 
Join Date: Apr 2010
Posts: 189
Default

You want to be able to run your bead roller as slow as possible so that you can do real trick quality work. Straight work you will also be able to acurately at a fast speed , If you are going to do a lot of trick work you will also be making trick dies and hard surfacing the outer edge as cold roll dies will deform quickly if used a lot. You will also end up wanting to stiffen up yoour frame if you are doing trick work. Dutch
__________________
Dutch Comstock
926 Shells Bush Road
East Herkimer,N.Y. 13350
(315)866-3034
comstockmetalshaping.com
Reply With Quote