View Single Post
  #2  
Old 10-06-2018, 12:21 PM
Ken Hosford Ken Hosford is offline
Member
 
Join Date: Nov 2009
Location: South East Michigan
Posts: 416
Default

Wes
You are starting out wrestling the 800 lb gorilla . 6061 is not considered very workable . Most 6061 I see is T6 and would need annealing to be workable .
6061 typically will crack if bent 90 degrees very tightly .
Even if annealed, it is not very workable , it would be worth the investment to find 3003 .
Reply With Quote