View Single Post
  #671  
Old 05-25-2017, 08:15 PM
Jack 1957's Avatar
Jack 1957 Jack 1957 is offline
MetalShaper of the Month Dec . 2016, Sept 2019 Metal Shaper Of The Year 2021
 
Join Date: Sep 2014
Location: Strongsville,OH
Posts: 1,131
Default

I wanted to radius the left tail light opening today but I took a second look at the shape of the right side and still wasn't satisfied with it. The slope at the rear edge still didn't match the left side. It was about 4 degrees off and the edge along the outboard side of the opening needed to be built up about 1/8". I got all that straightened out. It took most of the day with not a lot to show for it but it's done. It's starting to look a little like Frankenstein back here but it's dimensionally correct. Nothing a little duraglass can't handle. I'll finish the left tail light opening next then get started on the skirt.


Name:  834.jpg
Views: 2287
Size:  56.4 KB
__________________
Jack

Set a Goal So Big That You Can't Achieve It Until You Grow Into The Person That Can.
Reply With Quote