View Single Post
  #231  
Old 10-11-2017, 09:41 PM
Mike Motage Mike Motage is offline
MetalShaper of the Month Oct 2016, June 2020, April 2023
 
Join Date: Nov 2012
Location: S.E.Michigan
Posts: 802
Default

Carey, I've got a 5.3L flat head (combustion chamber) to start with. It will be bored a lot and have new pistons with an 8.5-1 Comp ratio. I will fabricate a swoopy intake and stainless exhaust system. I'll probably install as large of valve as the seats will allow, along with port work. It will also have a dry sump oil system, 5 speed manual trans. I'm also going to use an aftermarket EFI system.
__________________
Mike
Reply With Quote