View Single Post
  #8  
Old 07-14-2018, 09:16 PM
Oldnek Oldnek is offline
Member
 
Join Date: Mar 2011
Location: Ulladulla, Australia
Posts: 1,346
Default

Just as a side line to what has been mentioned, Which is great advice.
make sure your welded area is the same thickness as your parent metal, or you are chasing your tail.
The area behind the panel needs to be flat and smooth as well as the surface. Even if its 0020" thicker it will have a dramatic effect on causing issues.
Good luck with it as there a bugger to chase out.
__________________
John
EK Holden V8
Reply With Quote