View Single Post
  #58  
Old 06-23-2018, 09:43 AM
76mx 76mx is offline
Member
 
Join Date: Jun 2018
Location: Fort Worth, Texas
Posts: 16
Default

Jacob, yes that is what I meant by supported in two planes. Any joint that would be a butt joint was also designed with a third member that makes that same joint a lap joint as well.
Rick, The dogbones index the pieces but in many cases I also drill rivet holes while the piece is on the CNC which mainly help with indexing but cannot hurt structurally. There are several dry times, I use the 15 minute one. The trick is to find one that sets up fast enough to suit without drying fast enough to clog up the gun between fitments.
__________________
Charley Strickland
Reply With Quote