View Single Post
  #948  
Old 07-17-2018, 08:17 PM
Jack 1957's Avatar
Jack 1957 Jack 1957 is offline
MetalShaper of the Month Dec . 2016, Sept 2019 Metal Shaper Of The Year 2021
 
Join Date: Sep 2014
Location: Strongsville,OH
Posts: 1,131
Default

This is the left lower rail on the CTS. The plate setting to the right of it was sandwiched between the rail and the floor when it was welded together. I can't use the rail to reinforce the floor but I can use the plate. It is C channel shaped with flanges along the sides. I'll weld it back on the floor and it won't hang any lower than the floor since the floor is recessed where the rail was.

Name:  1225.jpg
Views: 956
Size:  63.4 KB

Name:  1226.jpg
Views: 966
Size:  71.9 KB

I had to make a temporary fixture on the 49 to mark the height and location at the center of the windshield before I started cutting out the firewall and floor. It can be removed and replaced easily while I'm working on fitting the new firewall. It is just some scrap conduit and a couple other bits.

Name:  1227.jpg
Views: 969
Size:  33.5 KB

Most is out. I'll cut for the tunnel and start fitting up tomorrow.

Name:  1228.jpg
Views: 939
Size:  33.7 KB
__________________
Jack

Set a Goal So Big That You Can't Achieve It Until You Grow Into The Person That Can.
Reply With Quote