Quote:
Originally Posted by Ken Hosford
At that many you may be wise just to have them made Get a quote from a collet maker . It may be less than you think .
|
Thanks Ken, that would be the plan to fall back on.
Cheers
Sky
Quote:
Originally Posted by Stan Fulton
Sky,
We are currently trying to get final quotes for all sizes of collets and nuts for all the different sizes of Pullmax machines. Should have final prices this next week.
Thanks,
Stan Fulton
Fulton Metal Works
|
Thanks Stan.
Good to hear from you. And that is really good news! I am having special low shoulder center blocks made for the P21/P201 in order to gain extra clearance on Ron Naida style dies, Eckold dies and so on. The four sets of short collet nuts and collets requested are for a friend and for myself. Although the blocks can be used with long collets I may be interested in more sets of collets/collet nuts. The custom block in conjunction with short collets on top and bottom will give a tad more than 3 inches of extra clearance.
Please contact me via email as soon as you have the prices. Thanks!
Cheers
Sky