Thread: Corvette/Scarab
View Single Post
  #6  
Old 06-27-2011, 06:03 PM
Scrap maker's Avatar
Scrap maker Scrap maker is offline
MetalShaper of the Month Sept. 2015, Nov. 2019
 
Join Date: Mar 2011
Location: Portland, OR
Posts: 300
Default

Yes i also would like to do the body in aluminum. I have done most my car body fab in 20/22 gauge steel and fiberglass and can shape aluminum but no way to stick it together. I have a mini torch and years ago i did some tig welding aluminum but no longer have the welder or the skill.......... I have a buddy that visited the place where they built the Cobra bodies in the 80's. He said they used a propane mix because it was cooler to do their gas aluminum work.
Yes I can buy a tig if needed but would need to get unrusty. I know plenty of guy's with nice tig's that are good at it and if i tacked it together they could do a better job then me welding it up. Any thoughts on this subject of kind of aluminum, thickness,rod selection and gas welding would be a help. Thanks, Ray
__________________
Ray
Reply With Quote