All MetalShaping

Go Back   All MetalShaping > General Metal Shaping Discussion > Events
  Today's Posts Posts for Last 7 Days Posts for Last 14 Days  

Reply
 
Thread Tools Search this Thread Display Modes
  #11  
Old 05-29-2019, 05:56 AM
RockHillWill RockHillWill is offline
MetalShaper of the Month Jan 2019
 
Join Date: Oct 2009
Posts: 2,902
Default Motel Accomodations

We have blocked (20) rooms at The Richland Inn in Lewisburg, Tenn. Their phone number is 931-359-1800.

These rooms are only blocked until June 21st as there is a large horse show in a neighboring town shortly after this date. I would recommend not hesitation to make your arrangements here as soon as possible.

The attendance list has been updated. We have 12 non-confirmed attendees and the waiting list is currently very short, so if you have an interest contact one of us and your name will be added as an opening occurs.
__________________
Will
Reply With Quote
  #12  
Old 05-29-2019, 08:15 AM
bob baisden bob baisden is offline
Member
 
Join Date: May 2009
Posts: 115
Default

Booked a room. Thanks for setting this up!
Bob
Reply With Quote
  #13  
Old 05-29-2019, 10:19 PM
scranm scranm is offline
Member
 
Join Date: Jun 2009
Location: Indiana
Posts: 267
Default

if there is room put me down. thanks
__________________
Mark
Reply With Quote
  #14  
Old 05-30-2019, 05:41 AM
RockHillWill RockHillWill is offline
MetalShaper of the Month Jan 2019
 
Join Date: Oct 2009
Posts: 2,902
Default

I have updated the attendance list.

If your name is on the list and you have not notified us of your attending, would you be so kind as to let us know if you are able to attend (or not) so that we can include others.

Thanks.
__________________
Will
Reply With Quote
  #15  
Old 05-30-2019, 08:56 AM
duck duck is offline
Member
 
Join Date: May 2009
Location: Just north of Cincinnati
Posts: 36
Default

Will,

I
f you have someone not able to attend, please put me on the list.

Thanks,

Duck (Gary Drake)
__________________
Gary Drake
Reply With Quote
  #16  
Old 05-30-2019, 09:05 PM
memphisrain memphisrain is offline
Member
 
Join Date: Jul 2010
Location: Raleigh, NC
Posts: 68
Default

Please add me to the list, Will
__________________
Big Jake

"I've never met someone with so much tenacity in all my life." - RockHillWill

@madscientistfab
Reply With Quote
  #17  
Old 06-02-2019, 12:47 PM
RockHillWill RockHillWill is offline
MetalShaper of the Month Jan 2019
 
Join Date: Oct 2009
Posts: 2,902
Default

There has been an enthusiastic response to this sixth annual Redneck Roundup. The allotted spaces have been filled at this time.

Here is the attendee list as of this date.

Dan Pate
Mike Yurko+
Eric Goodrich
Paul Hermon
A B Bond
Dan Shady
Mark Seabold
Bill Trombley
Patman Brubaker
Chris Hamilton
*****(10)
Bob Kolenda
Mallory Kolenda
Rich J 3
Rich - employee
Steve Hamilton
John Tratnau
MemphisRain (Big Jake)
Rob Basil
Ron Streck - one day?
Mike Davenport-?
*****(20)
Mike Clarahan
Kyle Yocum
Brent Terry
Mike Phillips
Mikes friend Charlie
Robert Anton
Kevin Anton
Larry Brown (per Kerry)
Gary Drake (duck)
Clint Button
*****(30)
Robert Robinson
Tommy Tyson
Shawn Cantrell
Field Farrar*
Steve Bowden
Robert McCartney
Mark ('scram')
Benjamen Hover
Mike Mefford
Mike Stinton
*****(40)
Mike Huby
Bill Vestivich
Mark Qualls
Kevin Masson
Tom Wilson
Andrew Slater
Jeff Newton
Bob Baisden
Jimmy Matthews
Chris Matthews
*****(50)

Jim and I are looking forward to this next chapter of the Redneck Roundup in Tennessee. You might consider bringing your own chair and perhaps a one or two person work table, Helmets, goggles, ear protection, eye protection and small or no belt buckles. There are some very rare cars at this location and as much precaution as possible should be made to not dent or scratch any of these restored cars.

__________________
Will
Reply With Quote
  #18  
Old 07-13-2019, 07:05 AM
kingdommetalworks kingdommetalworks is offline
Member
 
Join Date: Aug 2016
Location: Hampton Ky.
Posts: 27
Default Metal Shaping class at Redneck Roundup Belfast TN

I have been invited to teach a 3 day class in Belfast TN August 26th-28th at the shop of Jim Hery.

I will be teaching metal shaping techniques for the beginner to the advanced student using Jim's well equipped shop, using some of his wooden bucks to fit the fabricated panels to. The class will focus on hand tools, using the English wheel, power hammers and many metal shaping tips and tricks using the road map I teach to accomplishing a finished panel.
If you are interested in signing up for this class, you can email me me at: kingdommetalworks@gmail.com or call me at (310) 947-1120 for information on how to register. The cost is $650.00 for the 3 day class running each day from 9:00 am- 5:00pm.

Hope to see you there!
IMG_2843-4.jpg
__________________
Kevin Masson

http://kingdommetalworks.com/
Reply With Quote
  #19  
Old 07-13-2019, 03:30 PM
BrettW BrettW is offline
Member
 
Join Date: Jan 2019
Location: Huntsville, AL
Posts: 7
Default

Will, if anyone backs out or can't make it I would like to attend. Since I am down in Huntsville, Driving up isn't a big deal.


I'm looking at taking Kevin's class the following Monday.




Thanks
Brett.
__________________
Brett W
http://www.fusionworksfabrication.com
Reply With Quote
  #20  
Old 07-18-2019, 10:57 AM
patman's Avatar
patman patman is offline
MetalShaper of the Month Mar. 2010
 
Join Date: Jun 2009
Location: Hastings Nebraska
Posts: 284
Default

Hey everyone I am a little late to the party, but I am very excited for the Event and I will be teaching a class the weekend before the event August 16,17,18, 19th! The class will be a supercharged version of my pattern and panel development class. We will cover all the pattern work for the project and the how and why of pattern and what they tell us.

We will be shaping a part from flat sheet to finished panel, in the class we will also make any special tooling needed for the project. This is a great class to open yourself up to making your own tooling and fixtures as anything we make to get through the project will be made with simple stuff no cnc shenanigans.

Through the whole class we will be using the English Wheel, and hand tools and we will compare the results of the hand tool methods to some of the large power equipment Jim has in his shop. We will have a variety of things to work on so if your just getting started with metalshaping DO NOT BE INTIMIDATED and if you have been into it for a while I put together something more challenging for you. This is the reason class sizes are small!

Cost for this class will be $700 per person with a maximum of 6 people. Lunch refreshments and all materials will be provided each day. If you have any questions or would like to sign up for this class shoot me a email customridesbuiltmine@yahoo.com or just give me a call at the shop 1402 462 8581 thanks everyone and have a great day!!

reo grill.jpg
__________________
Pat

WWW.CustomRidesbuiltmine.com
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 10:30 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.