|
|
|
|
|
#1
12-21-2017, 08:34 AM
|
|||
|
|||
Lancia Appia Zagato
The reason is becouse the right side is missing and I must transfer this in the other side.
__________________
Onorius Last edited by Steve Hamilton; 12-21-2017 at 09:55 AM. 
|
|
#2
12-21-2017, 11:09 AM
|
||||
|
||||
|
Are you planning to make a Lexan piece from the shaped aluminum or just use the metal cover as is? I ask because I'm in the middle of making Lexan covers for my GTO headlights.
__________________
Joel Heinke Be original; don't be afraid of being bold!
|
|
#3
12-21-2017, 02:19 PM
|
|||
|
|||
|
in fact no, the plastic is original and it is very weak and I have to use it to build its frame and the right side that does not exist, so I made a copy to use it for this purpose.
__________________
Onorius
|
|
#4
02-24-2018, 04:39 AM
|
|||
|
|||
|
I want to use this for hammer form in the headlight area, I hope its works
I want to use this for hammer form in the headlight area, I hope its works
__________________
Onorius Last edited by Steve Hamilton; 02-24-2018 at 09:19 AM.
|
|
#5
02-24-2018, 05:45 PM
|
|||
|
|||
|
Wonderful work Onorius!
How did you curve the pieces in the buck? Cheers Charlie
__________________
Why does dust stick to everything, but nothing sticks to dust?
|
|
#6
02-25-2018, 01:35 PM
|
|||
|
|||
|
Quote:
The contour I make from 1.5mm in shrinker and stretcher and the others profile I bend manual from car contour, and then I did one on the inside as shown in the pictures
__________________
Onorius Last edited by Onorius; 02-25-2018 at 03:54 PM.
|
|
#8
08-23-2018, 04:36 PM
|
||||
|
||||
|
Very impressive work Onorius!
__________________
Kerry Pinkerton
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Hybrid Mode
