All MetalShaping

Go Back   All MetalShaping > Metal Shaping Projects > Automotive Projects
  Today's Posts Posts for Last 7 Days Posts for Last 14 Days  

Reply
 
Thread Tools Search this Thread Display Modes
  #41  
Old 11-20-2018, 05:40 AM
Onorius Onorius is offline
MetalShaper of the Month Dec. 2018
 
Join Date: Jun 2016
Location: Romania
Posts: 82
Default

Quote:
Originally Posted by touringgarage View Post
Gratulation, very interesting Works
BP
Thank you very much and I appreciate your comment, especially since it comes from a real craftsman who also did the same piece but with top standards, thanks once again. This is my first work in metal shaping (I have made small pieces but never so big, complex and aluminum), and on this occasion I learned to weld aluminum and use the English wheel.
__________________
Onorius
Reply With Quote
  #42  
Old 11-23-2018, 06:52 PM
Bevelhead Bevelhead is offline
Member
 
Join Date: Nov 2011
Location: Melbourne
Posts: 112
Default

Onorius, With you headlight covers can you explain how you hemmed the edge so cleanly. Did you tip with a bead roller or tip by hand. If so how did you shrink the folded edge when turning back in on itself

It looks great
__________________
Rick Jones
Reply With Quote
  #43  
Old 11-24-2018, 04:28 AM
Onorius Onorius is offline
MetalShaper of the Month Dec. 2018
 
Join Date: Jun 2016
Location: Romania
Posts: 82
Default

Quote:
Originally Posted by Bevelhead View Post
Onorius, With you headlight covers can you explain how you hemmed the edge so cleanly. Did you tip with a bead roller or tip by hand. If so how did you shrink the folded edge when turning back in on itself

It looks great
Hy, please give me a picture of the part you refer to, because I do not know exactly what you mean and then I answer. You mean A or B? thank you.

Name:  25.jpg
Views: 461
Size:  51.1 KB
__________________
Onorius

Last edited by Steve Hamilton; 11-24-2018 at 09:30 AM.
Reply With Quote
  #44  
Old 11-24-2018, 12:55 PM
touringgarage touringgarage is offline
MetalShaper of the Month September 2014, April 2019
 
Join Date: Nov 2011
Location: Austria
Posts: 215
Default

Hello,

you build a very good and Interesting Frontend for this Lancia.

Interesting and good Idee is the Prepare before from Welding.

Much Work and Unusual, however a good Ideas is, that you Welding separately the Lighthousing.

I m Restoration the same Lancia Appia Zagato.

This is long Time back a Race Car and have serveral bad Crash Repairs.

So i must build the half Car new



Name:  Lancia Appia Zagato Karosserie Vorbau Anfertigung 2 002.jpg
Views: 457
Size:  69.6 KB

Name:  Lancia Appia Zagato Karosserie Vorbau Anfertigung 003.jpg
Views: 460
Size:  63.1 KB

Name:  Lancia Appia Zagato Karosserieaufbau Grundierung innen 002.jpg
Views: 452
Size:  74.0 KB

Name:  Lancia Appia Zagato Karosserieaufbau Motorhaube 002.jpg
Views: 453
Size:  65.0 KB

Name:  Lancia Appia Zagato Karosserieaufbau re vo 009.jpg
Views: 460
Size:  59.5 KB

Name:  Lancia Appia Karosserieaufbau Vorbau 001.jpg
Views: 449
Size:  68.8 KB

Name:  Lancia Appia Zagato Vorbau rechts richten 005.jpg
Views: 448
Size:  81.4 KB

Name:  Lancia Appia Zagato Vorbau Aufbau 5 002.jpg
Views: 452
Size:  64.3 KB

Name:  Lancia Appia Zagato Karosserieaufbau 6 002.jpg
Views: 453
Size:  73.6 KB

Your have real good Hands if it's your first work with aluminum.
Big respect for this nice Work.
__________________
Bernhard
Reply With Quote
  #45  
Old 11-24-2018, 02:03 PM
Onorius Onorius is offline
MetalShaper of the Month Dec. 2018
 
Join Date: Jun 2016
Location: Romania
Posts: 82
Default

Quote:
Originally Posted by touringgarage View Post
Hello,

you build a very good and Interesting Frontend for this Lancia.

Interesting and good Idee is the Prepare before from Welding.

Much Work and Unusual, however a good Ideas is, that you Welding separately the Lighthousing.

I m Restoration the same Lancia Appia Zagato.

This is long Time back a Race Car and have serveral bad Crash Repairs.

So i must build the half Car new

Your have real good Hands if it's your first work with aluminum.
Big respect for this nice Work.
I really appreciate the fact that you took the time to view my post, thank you very much for the pictures, I analyzed the post with your Lancia Appia Zagato before I started my project and honestly I felt a little intimidated, that's why I feel honored for your comment . I found very useful information for me in your post that helped me a lot. Thank you again.
__________________
Onorius
Reply With Quote
  #46  
Old 11-24-2018, 02:48 PM
Onorius Onorius is offline
MetalShaper of the Month Dec. 2018
 
Join Date: Jun 2016
Location: Romania
Posts: 82
Default frame for the headlamp

frame for the headlamp

Name:  1.jpg
Views: 429
Size:  49.8 KB

Name:  2.jpg
Views: 416
Size:  57.0 KB

Name:  3.jpg
Views: 419
Size:  55.8 KB

Name:  4.jpg
Views: 427
Size:  61.1 KB

Name:  5.jpg
Views: 423
Size:  58.7 KB

Name:  6.jpg
Views: 426
Size:  61.7 KB

Name:  7.jpg
Views: 418
Size:  56.5 KB

Name:  8.jpg
Views: 421
Size:  64.0 KB

Name:  9.jpg
Views: 420
Size:  74.5 KB

Name:  10.jpg
Views: 422
Size:  75.5 KB

Name:  11.jpg
Views: 418
Size:  77.0 KB

Name:  12.jpg
Views: 424
Size:  76.3 KB

Name:  13.jpg
Views: 419
Size:  63.3 KB

Name:  14.jpg
Views: 424
Size:  76.9 KB

Name:  15.jpg
Views: 426
Size:  73.5 KB

Name:  16.jpg
Views: 419
Size:  71.3 KB

Name:  17.jpg
Views: 423
Size:  67.4 KB

Name:  18.jpg
Views: 420
Size:  75.5 KB

Name:  19.jpg
Views: 416
Size:  50.2 KB

Name:  20.jpg
Views: 417
Size:  70.8 KB

Name:  21.jpg
Views: 410
Size:  78.1 KB

Name:  22.jpg
Views: 419
Size:  72.0 KB

Name:  23.jpg
Views: 417
Size:  72.0 KB

Name:  24.jpg
Views: 415
Size:  63.6 KB

Name:  25.jpg
Views: 417
Size:  74.0 KB

Name:  26.jpg
Views: 416
Size:  61.3 KB

Name:  27.jpg
Views: 414
Size:  57.8 KB

Name:  28.jpg
Views: 417
Size:  70.1 KB

Name:  29.jpg
Views: 425
Size:  66.5 KB
__________________
Onorius

Last edited by Steve Hamilton; 11-24-2018 at 08:15 PM.
Reply With Quote
  #47  
Old 11-24-2018, 07:26 PM
Bevelhead Bevelhead is offline
Member
 
Join Date: Nov 2011
Location: Melbourne
Posts: 112
Default

Onorius, I was referring to the very start of the thread, the first photos you posted. You have a lexan cover you reproduced in aluminium ans managed to fold the edges to form a hem. I have had troubled doing this wiyhout distorting the main body and getting a progressive shrink along the folded edge.........Hope this makes sense!!!
__________________
Rick Jones
Reply With Quote
  #48  
Old 11-25-2018, 05:51 AM
Onorius Onorius is offline
MetalShaper of the Month Dec. 2018
 
Join Date: Jun 2016
Location: Romania
Posts: 82
Default

Quote:
Originally Posted by Bevelhead View Post
Onorius, I was referring to the very start of the thread, the first photos you posted. You have a lexan cover you reproduced in aluminium ans managed to fold the edges to form a hem. I have had troubled doing this wiyhout distorting the main body and getting a progressive shrink along the folded edge.........Hope this makes sense!!!
Hy, here are the pictures with each step as I did this piece, I hope that's what you mean. If not, tell me, maybe we can fix it in the end

Name:  1.jpg
Views: 405
Size:  47.9 KB

Name:  2.jpg
Views: 401
Size:  47.9 KB

Name:  3.jpg
Views: 403
Size:  59.9 KB

Name:  4.jpg
Views: 397
Size:  64.1 KB

Name:  5.jpg
Views: 391
Size:  74.8 KB

Name:  6.jpg
Views: 397
Size:  56.8 KB

Name:  7.jpg
Views: 397
Size:  65.4 KB

Name:  8.jpg
Views: 392
Size:  59.4 KB

Name:  9.jpg
Views: 395
Size:  63.7 KB

Name:  10.jpg
Views: 394
Size:  67.8 KB

Name:  11.jpg
Views: 394
Size:  66.0 KB

Name:  12.jpg
Views: 394
Size:  49.8 KB

Name:  13.jpg
Views: 396
Size:  55.2 KB

Name:  14.jpg
Views: 391
Size:  56.4 KB

Name:  15.jpg
Views: 392
Size:  60.6 KB

Name:  16,.jpg
Views: 395
Size:  54.6 KB

Name:  17.jpg
Views: 403
Size:  63.8 KB

Name:  18.jpg
Views: 391
Size:  58.3 KB

Name:  19.jpg
Views: 397
Size:  55.4 KB
__________________
Onorius

Last edited by galooph; 11-25-2018 at 08:27 AM.
Reply With Quote
  #49  
Old 12-01-2018, 03:54 PM
rewdco rewdco is offline
Member
 
Join Date: May 2014
Location: Belgium
Posts: 133
Default

Congrats on being MSOTM, well deserved!!!
Jan
__________________
Jan
Reply With Quote
  #50  
Old 12-01-2018, 04:00 PM
neilb's Avatar
neilb neilb is offline
MetalShaper of the Month March 2019
 
Join Date: Aug 2013
Location: Melbourne OZ
Posts: 628
Default

congrats on MSOTM well deserved
__________________
Neil
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

All times are GMT -5. The time now is 02:10 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.