All MetalShaping

Go Back   All MetalShaping > Miscellaneous stuff you need to know > Posting Pictures
  Today's Posts Posts for Last 7 Days Posts for Last 14 Days  

Reply
 
Thread Tools Search this Thread Display Modes
  #11  
Old 11-27-2018, 08:43 AM
seventheaven seventheaven is offline
Member
 
Join Date: Oct 2013
Location: Dorchester, UK
Posts: 9
Default Dimple Dies

I've made my own dimple die.
I drew up a few in CAD and spent most of an afternoon making one.
I thought I was saving money - right up to the point I had it heat treated.
DOH!
If anyone else wants a go the dwg files are here:
http://www.super7thheaven.co.uk/blog...-cad-drawings/

Personally, having made one - I'm buying my next ones





What I'd like to know...
Is there any rule for selecting the hole size in relation to the panel?
How close can I go to the edge of a panel? etc.
Yeh, I know I could use FEA but then I'd need the whole body in CAD.

There seems to be 2 types of dimple die. Ones that leave a flat portion in the centre and ones that don't. The ones with a flat washer like bit in the middle (still has a hole).

I have a dimple die from a swap meet a few years back (It's stamped 32mm - similar to above CAD) and it leaves a swage ring with a 39mm internal diameter. To get a dimple die hole to look like my previous post, I used a 38mm /1.5" hole cutter.
The problem was getting the dimple die central on the oversized hole.

Is my 32mm die really a 39mm die?

Am I doing it wrong?

Should I use a 32mm hole cutter and leave that extra ring?
Should I leave that 'ugly' ring or can I remove it? I'd have to cut n file it out and that could leave a messy finish (and potential weak points).

If I use the bigger cutter, what's the rule on picking it's size? e.g. for a dimple with a 50mm internal diameter, what sized cutter should I pick?

How do other people centralise them? As the press applies pressure, on a test piece, I could see the sheet metal slip around as the flare was created.

Should I look for different flare tools?

Any help appreciated
__________________
Mark

www.super7thheaven.co.uk
Reply With Quote
  #12  
Old 11-27-2018, 02:32 PM
seventheaven seventheaven is offline
Member
 
Join Date: Oct 2013
Location: Dorchester, UK
Posts: 9
Default dimple die flat

This is what I mean by the having a small flat at the bottom. I measured the final hole and it's 33.6mm. It started at 32mm aswas very snug on the dimple die.



The 'coining' mark is 38mm the same as the male die. You can also see that this test piece wandered as the die was compressed. I think I need to work out a way of clamping the punch and the workpiece.

Should I just use a 38mm hole cutter?
Should I stop worrying?
__________________
Mark

www.super7thheaven.co.uk
Reply With Quote
  #13  
Old 11-27-2018, 02:46 PM
hillman hillman is offline
Member
 
Join Date: Jun 2009
Location: Kyabram,Victoria,Australia.
Posts: 57
Default

Hi Mark
I had a look at your site (excellant), when I click on the dwg files for the dies they just come up as a txt file, is this something you wanted? if so it's Ok I just wanted to try and convert into Rhino 6
Thank Phil
__________________
"Hillman"
Reply With Quote
  #14  
Old 11-27-2018, 04:32 PM
seventheaven seventheaven is offline
Member
 
Join Date: Oct 2013
Location: Dorchester, UK
Posts: 9
Default

Quote:
Originally Posted by hillman View Post
...when I click on the dwg files for the dies they just come up as a txt file, is this something you wanted? if so it's Ok I just wanted to try and convert into Rhino 6
Thank Phil
Hi, Not quite sure how your trying to open them. Try right clicking and 'save link as'
You should have a .dwg file. I've never used Rhino, but I'm guessing it should be able to import dwg's.
__________________
Mark

www.super7thheaven.co.uk
Reply With Quote
  #15  
Old 11-27-2018, 09:05 PM
hillman hillman is offline
Member
 
Join Date: Jun 2009
Location: Kyabram,Victoria,Australia.
Posts: 57
Default

Thanks Mark
Just having a brain fade and looks like it imports into Rhino 6
just fine
Thanks again Cheers Phil
__________________
"Hillman"
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 07:33 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.