All MetalShaping

Go Back   All MetalShaping > General Metal Shaping Discussion > General Discussion
  Today's Posts Posts for Last 7 Days Posts for Last 14 Days  

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 11-14-2018, 10:54 AM
metal manny metal manny is offline
Member
 
Join Date: Aug 2011
Location: Johannesburg, South Africa
Posts: 509
Default Don't throw away that broken welding helmet!

I own a few auto-darkening welding helmets of varying quality and price.

One of these helmets of reputable quality and situated in the middle price bracket, suddenly stopped working for no apparent reason. As it was out of guarantee, and hardly used, I just kept it with the hope of either sending it in for repair or trying to do fix it myself. A second, cheaper helmet also suffered the same fate and so I decided to see if I could detect the fault as I had nothing to lose.

I removed the lens assembly from the helmet, and carefully split it apart along the glue seam using a box cutter. Inside the electronic workings is a 3V lithium cell with 2 spot welded legs which has been soldered directly to the circuit board. I removed the cell, noting carefully the polarity, and re-soldered two wires in place of the legs as per the attached pic. For a test, I rigged a 3V cell to the wires, and to my delight, the contraption dimmed upon striking an arc.
I repeated this exercise with my quality helmet and herein found two 3V cells, which I duly removed. I also took the trouble of drilling two small holes in the back plate to feed external power leads to the batteries (as shown), as I wasn't going to go through this delicate procedure each time I needed to replace dead cells. Again, upon testing, the second helmet worked perfectly again! Lastly I made a crude battery holder from scrap plastic sheet and bolted it into the helmet

Lithium cells are available everywhere, but the ones with legs as depicted are easily obtained from electronics parts distributors. I bought the two most powerful in milliamp-hours that I could find so as to prolong the periods between renewal.

I am lead to believe that these lithium cells are recharged by the solar panel in the helmet during welding, so if not used often, then the batteries might die prematurely (why the batteries aren't in a holder for easy replacement beggars belief). It is great to know that if the helmet ceases to work, then there's a great possibility that a battery replacement is within the scope of the frequenters of this site...


d7585a25-9f43-4c36-bdfe-a5857358605e.jpg

c61c3bc3-6ce0-4a50-ab5e-56131b2fd403.jpg

F7450875-01.jpg
__________________
Manny

Remember that the best of men, are only men at best.
Reply With Quote
  #2  
Old 11-14-2018, 03:48 PM
Kerry Pinkerton's Avatar
Kerry Pinkerton Kerry Pinkerton is offline
Administrator
 
Join Date: May 2009
Location: Near Huntsville, Alabama. Just south of the Tennessee line off I65
Posts: 8,321
Default

Great post! I have a whole shelf full of dead helmets.
__________________
Kerry Pinkerton
Reply With Quote
  #3  
Old 11-14-2018, 04:38 PM
Gareth Davies Gareth Davies is offline
Member
 
Join Date: Aug 2012
Location: Staffordshire, England
Posts: 665
Default

Great bit of recycling and a handy hint.
__________________
Gareth Davies
Reply With Quote
  #4  
Old 11-14-2018, 10:39 PM
BTromblay BTromblay is offline
ADMINISTRATOR MetalShaper of the Month August 2018
 
Join Date: Oct 2015
Location: Mukwonago, Wi
Posts: 567
Default

Hi,

Great post, thanks for sharing. Nothing worse than having an expensive helmet give up the ghost over a 3 volt battery.

B
__________________
Bill Tromblay

"A sign of a good machinist, is one who can fix his F$@& Ups" My mentor and friend, Gil Zietz Micro Metric Machine.
Reply With Quote
  #5  
Old 11-15-2018, 09:22 AM
Steve Hamilton's Avatar
Steve Hamilton Steve Hamilton is offline
ADMINISTRATOR MetalShaper of the Month Dec. '09 & May '11
 
Join Date: May 2009
Location: Fond du Lac WI.
Posts: 2,405
Default

Great invention and repair!

Thanks for posting it!

My miller helmet has a easy to replace battery, not cheap from them, but easy.
A cover to remove 1/4 turn I think, and the whole lens assembly stays in the helmet.

Steve
__________________
Steve Hamilton
Hamilton Classics
Auto Restoration & Metalshaping
Reply With Quote
  #6  
Old 11-15-2018, 11:49 AM
John Buchtenkirch John Buchtenkirch is offline
MetalShaper of the Month October 2012
 
Join Date: Jul 2009
Location: Glen Cove, Long Island
Posts: 1,675
Default

Thanks for helping us save a few dollars……….. very helpful. Hard to believe they wouldn’t make the batteries replaceable . ~ John Buchtenkirch
__________________
John
Reply With Quote
  #7  
Old 11-15-2018, 04:32 PM
Steve Hamilton's Avatar
Steve Hamilton Steve Hamilton is offline
ADMINISTRATOR MetalShaper of the Month Dec. '09 & May '11
 
Join Date: May 2009
Location: Fond du Lac WI.
Posts: 2,405
Default

More profit in selling helmets than batteries

Steve
__________________
Steve Hamilton
Hamilton Classics
Auto Restoration & Metalshaping
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 06:34 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.