#1
|
|||
|
|||
I Made a Bowl
Not really a question but I made a bowl!
IMG_0203.jpg IMG_0204.jpg I can't seem to get these pics straight The edges are a bit krinkly. Can I planish the edges smooth without undoing my tucks?
__________________
Paul Last edited by snedboy; 09-03-2019 at 05:01 PM. |
#2
|
||||
|
||||
Work them from the outer edges inward. The shape will flatten out a little in the process. Is this a practice piece, or an actual part you're making? If it's just a practice piece lay it on a piece of paper and trace the diameter on the paper with a pencil. Planish the piece and lay it on the paper again. Note how much difference before and after for future reference. If you're making an actual part that needs to be a specific diameter, keep shrinking until the diameter is slightly smaller than needed then planish.
__________________
Jack Set a Goal So Big That You Can't Achieve It Until You Grow Into The Person That Can. |
#3
|
|||
|
|||
Quote:
__________________
Paul |
Thread Tools | Search this Thread |
Display Modes | |
|
|