|
#1
|
|||
|
|||
bender
looking to get bender to do some home fab work, jd2, rouge or something. what your opinion on those two and suggestions on others
__________________
wayne |
#3
|
|||
|
|||
I have a JD2 model 32 bender that I use for 1.75" round tube. Well worth the money and can be adapted to hydraulic if needed.
jd2.jpg
__________________
Mike I have never made anything, I just modify the things around me into useful items with abilities that were GIVEN to me. |
#4
|
|||
|
|||
I have a Pro-Tools 105HD and a Williams Lobuck. I hate that the 105 is mounted horizontally, but I have no fear of breaking the dies and there is a better selection of dies for the 105. At some point I am going to design a mount to flip mine vertically, but beyond that I would recommend the 105.
|
#5
|
||||
|
||||
I'll follow-up that I converted my 105HD to hydraulic with a HF cylinder, and mounted the bender on a rolling stand. Now I can move it around the shop as needed instead of bolting it place, and it makes it much easier to not waste limited space.
|
#6
|
|||
|
|||
Rogue .. takes less floor space , full bend , powered , easy to use , if you upgrade to the roller dies your part doesn`t need to be lubed so you aren`t constantly wiping grease off the tubing (and your hands) , and its affordable
Gary
__________________
Gary |
Thread Tools | Search this Thread |
Display Modes | |
|
|