#1
|
|||
|
|||
Very small & short mini meet in Rock Hill
This was fun as all heck. We did some work, solved a few world issues and 'classified' as many politicians as we could think of while warming the seat of a local eating establishment for an hour or two. Mike Yurko from Front Row Motorsports and Andrew Slater (SWT) came by on Saturday. We discussed the Cass Nawrocki shrinking tool that John Tratnau made for me, worked on the Bugatti headlight buck, the Model A fender buck and did some 'testing' on the wheeling machine. Note the ease at which Mike made his panel in under 15 minutes. He formed the roll in the center of the panel, contoured one end and added a converging character line at the other end. Andrew made the attaching fixture and 90 degree holding fixture for the Bugatti. Mostly, I held the glue brush. THANKS, guys!
FunSat 014.jpg FunSat 024.jpg FunSat 026.jpg FunSat 027.jpg FunSat 030.jpg FunSat 020.jpg FunSat 022.jpg FunSat 021.jpg FunSat 023.jpg
__________________
Will |
#2
|
||||
|
||||
Looks like you guys had a blast!
Wish I lived closer. STEVE
__________________
Steve Hamilton Hamilton Classics Auto Restoration & Metalshaping |
#3
|
|||
|
|||
No problem, Will. I had a great time, as always!
__________________
Andrew Slater HANGAR 18 FABRICATION |
Thread Tools | Search this Thread |
Display Modes | |
|
|