All MetalShaping

Go Back   All MetalShaping > General Metal Shaping Discussion > Basic questions and answers
  Today's Posts Posts for Last 7 Days Posts for Last 14 Days  

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 04-16-2018, 05:56 PM
sandmanred sandmanred is offline
MetalShaper of the Month July 2017, Sept 2022
 
Join Date: Nov 2015
Location: Saint Paul, MN
Posts: 296
Default How to bead the center of this fender?

I'd like to do a small bead down the center. I can only go 1/8 inch high or maybe a bit more, width maybe 1/2 inch or so. Any suggestions on how to do it with simple hand tools on simply made tools?

In case you're wondering I decided to do all the shaping on the wheel. It's 80 thou on the edges where there's no wheeling and about 60 thou in the middle.





__________________
Jeff

Last edited by sandmanred; 04-17-2018 at 07:46 AM.
Reply With Quote
 

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

All times are GMT -5. The time now is 07:11 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.