#1
|
|||
|
|||
Looking to buy P5 center toolholder
I am looking for a straight fence or a center toolholder for a Pullmax P5 I just purchased. Any help would be great, thanks!
__________________
Eric |
#2
|
|||
|
|||
Hi Eric
In my experience, those don't come cheap! Not sure how the toolholders work on a P5, but on my P21, the adjuster yoke which cradles the t-holder is bolted to the frame, with a keyway to locate it positively. As the off-centre holders can be installed in 2 positions, I machined a 1" spacer plate to bring the assembly forward so that when flipped 180 deg. the off-centre toolholder is adjustable to centre, giving me the best of both worlds. Don't have photos to hand, but can supply pics if you can use this option on your machine...
__________________
Manny Remember that the best of men, are only men at best. |
Thread Tools | Search this Thread |
Display Modes | |
|
|