#1
|
|||
|
|||
New to the forum.
Hi everyone. I'm an avid car restorer and modifier from the west coast of Canada. I've been working on and restoring cars most of my life and have built a few cars for others over the years as well. Recently I've decided it was time to advance my skills as a metal fabricator beyond the point of just cutting and welding. I'm fairly proficient with hammer and dolly work but that only goes so far so I now have a 4' box and pan brake, cheap bead roller modified and motorized like most do with an extensive set of dies, shrinker stretcher and a set of high quality dimple dies. I'm hoping with the help of this forum I can continue to learn and better my skills and share my projects! Nice to meet you all!
Terry Girard |
#2
|
|||
|
|||
Hi Terry welcome to the forum
Peter
__________________
P.Tommasini Metalshaping tools and dvds www.handbuilt.net.au Metalshaping clip on youtube http://www.youtube.com/watch?v=WEAh91hodPg Making Monaro Quarter panel: http://www.youtube.com/watch?v=KIpOhz0uGRM |
Thread Tools | Search this Thread |
Display Modes | |
|
|