#11
|
|||
|
|||
Jaroslav
Do you have any pics to show your method? Always wondered about spinning metal on the lathe? Thanks! Bruno Thanks for posting your method! It's great to get ideas on how to make various items.
__________________
Kevin B |
#12
|
|||
|
|||
Hi Bruno,
Good to see you stick with the job until you have a part. Press die parts like these are very informative- for the one doing them, and also for the interested spectators. Thank you for showing us your process so well.
__________________
Kent http://www.tinmantech.com "All it takes is a little practical experience to blow the he!! out of a perfectly good theory." --- Lloyd Rosenquist, charter member AWS, 1919. |
#13
|
|||
|
|||
Kevin. I found the video on You tube. The first video is amateur and simple, yet it's a good result. The second video is an experience .....
I would put a ball bearing into the lathe on the place for tool and I would mold it. It would need about 2 or 3 cylindrical forms. You can use wood or metal. What you find. https://www.youtube.com/watch?v=FHvtieU4-7Y https://www.youtube.com/watch?v=rqNRRqAjk6g
__________________
Jaroslav |
Thread Tools | Search this Thread |
Display Modes | |
|
|