#2
|
|||
|
|||
Metalshaping tricks # 5
Ok guys, It´s time to relese Metalshaping tricks # 5
It shows a easy way to make teardrop shaped impressions in steel, it´s just a little show off how it can be done, more of a " idea spinner" to start the creative power of all members here... The shape can be.......any you like!! Here is the link: http://www.youtube.com/watch?v=GfEFz...ature=youtu.be Enjoy! |
#3
|
||||
|
||||
The original TuckPuck Instructional Video's
I am in the slow process of producing new HD videos and will post the links as each section is posted. The new ones will add information that i have learned after putting out these videos. The section on mounting the TuckPuck is incorrect in these videos. The TuckPuck "must" be mounted on a solid surface and used with a mallet with a lot of mass. Here are the old ones About 6 years old):
http://www.youtube.com/watch?v=KEgnR...&feature=g-upl #2 http://www.youtube.com/watch?v=oShUN...&feature=g-upl #3 http://www.youtube.com/watch?v=KRmY9...feature=relmfu #4 http://www.youtube.com/watch?v=vw7--...feature=relmfu Last edited by mr.c; 08-27-2012 at 06:45 AM. Reason: typos |
#4
|
|||
|
|||
Metalshaping tricks # 6 is here!
Hi folks!
Hard to end up with smooth panels? here is a really old trick! http://www.youtube.com/watch?v=K8_FP...ature=youtu.be Take care! |
#5
|
||||
|
||||
I did a couple using a wooden stump.
__________________
Jacob Hunsinger Shrinking using a stump: https://www.youtube.com/watch?v=-HAFndATFo4&t=7s Making a reverse using a stump: https://www.youtube.com/watch?v=7PlF1BoMCQI Circular Truss E-Wheel http://allmetalshaping.com/showthread.php?t=15419 |
Thread Tools | Search this Thread |
Display Modes | |
|
|