All MetalShaping

Go Back   All MetalShaping > Metal Shaping Projects > Automotive Projects
  Today's Posts Posts for Last 7 Days Posts for Last 14 Days  

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 05-09-2009, 04:37 PM
123pugsy's Avatar
123pugsy 123pugsy is offline
MetalShaper of the Month Dec. 2019, Feb. 2022
 
Join Date: May 2009
Location: Markham,ON
Posts: 2,165
Default 41 Chrysler New Yorker Coupe

I will start a new thread for my project car.
I'm building a 1941 Chrysler New Yorker 2 door coupe.
I'm installing 37 Ford headlights and shaping the front end similar to a Willys.

I started by cutting off the headlight on the drivers side and brought the metal in to meet a template of the headlight.
Coated it with bondo to create a buck to take a pattern from.


























Thanks for looking,

Pugsy

Last edited by 123pugsy; 08-31-2009 at 05:30 PM.
Reply With Quote
  #2  
Old 05-09-2009, 04:48 PM
123pugsy's Avatar
123pugsy 123pugsy is offline
MetalShaper of the Month Dec. 2019, Feb. 2022
 
Join Date: May 2009
Location: Markham,ON
Posts: 2,165
Default Mockup

I got both sides done with the outer pieces and then had to mock up one side to take patterns and to see if I liked the shape.





I made up another piece exactly as the outside pieces and tacked it in place.




A little bit of "Burt" buck with some chicken wire to hold it in place and I got the shape.













A little bit of metal finishing.....
















And that's where I am now.

Lots more to do , but I'm in no rush.

Thanks for looking,
__________________
Pugsy

my project:
http://www.allmetalshaping.com/showthread.php?t=154

Last edited by 123pugsy; 08-31-2009 at 07:47 PM.
Reply With Quote
  #3  
Old 08-18-2009, 05:51 AM
123pugsy's Avatar
123pugsy 123pugsy is offline
MetalShaper of the Month Dec. 2019, Feb. 2022
 
Join Date: May 2009
Location: Markham,ON
Posts: 2,165
Default Welding Panels

Well I tried welding the 2 panels together and did not bad.
I TIG weld by trade, so that is not an issue. Going about it the right way with the stretching of the welds to get the shape back and trying to metal finish smoothly is new to me.

anyway....pics.....

Marked with the pattern for trimming...





Tacked together.....






A few 1" welds....







Penetration on the back side. The peening marks from stretching the previous welds showing....









You can see the weld line. The filler rod is slightly different color...









Still needs metal finished but I'll do it later...










Thanks for looking,
__________________
Pugsy

my project:
http://www.allmetalshaping.com/showthread.php?t=154

Last edited by 123pugsy; 08-31-2009 at 07:55 PM. Reason: foto fixing
Reply With Quote
  #4  
Old 08-18-2009, 07:07 AM
Kerry Pinkerton's Avatar
Kerry Pinkerton Kerry Pinkerton is offline
Administrator
 
Join Date: May 2009
Location: Near Huntsville, Alabama. Just south of the Tennessee line off I65
Posts: 8,321
Default

NICE work Pugsy! Did you take some of those photos at Ken Burt's shop? It sure looks like his ewheel in the background of the second photo.
__________________
Kerry Pinkerton
Reply With Quote
  #5  
Old 08-18-2009, 08:36 AM
Jacob's Avatar
Jacob Jacob is offline
Member
 
Join Date: May 2009
Location: Mansfield, Ohio
Posts: 204
Default

Thanks for sharing your progress. Looking forward to more posts.
Reply With Quote
  #6  
Old 08-18-2009, 09:09 AM
123pugsy's Avatar
123pugsy 123pugsy is offline
MetalShaper of the Month Dec. 2019, Feb. 2022
 
Join Date: May 2009
Location: Markham,ON
Posts: 2,165
Default

Quote:
Originally Posted by Kerry Pinkerton View Post
NICE work Pugsy! Did you take some of those photos at Ken Burt's shop? It sure looks like his ewheel in the background of the second photo.
Thanks Kerry.

That's the wheel I built right after the first time I went to Ken's.
Very similar to yours as that was basically the only one I saw before making it.
__________________
Pugsy

my project:
http://www.allmetalshaping.com/showthread.php?t=154
Reply With Quote
  #7  
Old 08-18-2009, 03:53 PM
Joe Hartson's Avatar
Joe Hartson Joe Hartson is offline
Administrator
 
Join Date: May 2009
Location: Pass Christian, MS
Posts: 4,981
Default

Nice job on the panel. Please post more pictures as the progress continues.
__________________
Joe Hartson

There is more than one way to go to town and they are all correct.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

All times are GMT -5. The time now is 06:02 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.