#1
|
|||
|
|||
Hello from NorCal
It's super bowl something or other in the Bay area.. I'm in my shop like a sane person
My dad taught me what a hammer and dolly was very early on (he was a Navy air frame mechanic)..I went on to bang nails in wood, build hi-rises and then back to metal shaping. I run my own restoration company specializing in 1975 and older off road and vintage 4X4 vehicles but also work on race vehicles and classics. Family races at Bonneville. "Grown up and still plays with cars" applies. Trained with people along the way and really have never stopped learning. Looking forward to learning more here! Michael Lueders
__________________
Michael Lueders "Research is what I do when I don't know what I'm doing" WVB |
#2
|
||||
|
||||
Hello Michael and welcome to the forum.
Do you know Zane over at Campbell Auto? Jere
__________________
Jere Kirkpatrick Valley Forge & Welding HEN-ROB Torch Dealer. Teaching The Fundamentals of Metal Shaping www.jerekirkpatrick.com All tools are a hammer except the chisel.....That's a screwdriver. |
#3
|
|||
|
|||
Jere..no but I know a Zane form Cotati speed shop and Jeff Spence from up your way.
__________________
Michael Lueders "Research is what I do when I don't know what I'm doing" WVB |
#4
|
|||
|
|||
Hi Michael welcome to the forum
Peter
__________________
P.Tommasini Metalshaping tools and dvds www.handbuilt.net.au Metalshaping clip on youtube http://www.youtube.com/watch?v=WEAh91hodPg Making Monaro Quarter panel: http://www.youtube.com/watch?v=KIpOhz0uGRM |
#5
|
|||
|
|||
Welcome, this is a great place for knowledge and ideas.
__________________
Sam Beeson |
|
|