#1
|
|||
|
|||
Brophy in Niagara
Howdy all...I'm an entertainment industry prop builder/scenic carpenter who plays with rusty old British cars in my spare time. Looking to hone my skills and learn some new stuff....hope I fit in.
This is me with a 16ga anvil I made for a production... Best...Rob
__________________
Rob Brophy |
#2
|
|||
|
|||
Too cool!
Mike |
#3
|
|||
|
|||
Hi Rob welcome to the forum,...... nice job on the anvil
Peter
__________________
P.Tommasini Metalshaping tools and dvds www.handbuilt.net.au Metalshaping clip on youtube http://www.youtube.com/watch?v=WEAh91hodPg Making Monaro Quarter panel: http://www.youtube.com/watch?v=KIpOhz0uGRM |
#4
|
|||
|
|||
Welcome to the forum, Rob. That is a fun picture. Very cool.
__________________
AC Button II http://CarolinaSculptureStudio.com https://www.youtube.com/channel/UCzSYaYdis55gE-vqifzjA6A Carolina Sculpture Studio Channel |
#5
|
|||
|
|||
Hey Rob,
Welcome to the metal gang. Carpentry ... rusty Brit stuff ... 16 ga anvil ... ratty old Bean shirt ... yep, you fit right in.
__________________
Kent http://www.tinmantech.com "All it takes is a little practical experience to blow the he!! out of a perfectly good theory." --- Lloyd Rosenquist, charter member AWS, 1919. |
#6
|
|||
|
|||
Thanks all!
I'm looking forward to cruising through the forum and reading all that is offered. crystallographic...I swear those Bean shirts are 50% cotton/50% asbestos. They wear forever in a metal shop ...Rob
__________________
Rob Brophy |
#7
|
||||
|
||||
Welcome Rob. Nick from Invision is in Niagra. He doesn't post much but if you don't know him, I can ding him to let him know you are nearby.
__________________
Kerry Pinkerton |
#8
|
|||
|
|||
Hi Kerry...I 'know' Nick from his postings on the garagegazette. His work is wonderful.
__________________
Rob Brophy |
Thread Tools | Search this Thread |
Display Modes | |
|
|