#1
|
|||
|
|||
88 Gsxr1100 airbox
Just to show none of us were instantly good at any of this.
So over ten years ago I bought a kemppi 250 mastertig cause I wanted to get into all sorts of alloy welding mainly bikes, even though I'm an autobody repairer I'm actually a bike nut, cars are what I make a living from motorcycles are my little passion. The bike has a 1340 bore kit carillo rods ,tighe cams ,pipemaster exhaust,formula 1 silenser with a 90mm baffle and 38mm flatslides The carbs ment loss of stock airbox and was using k&n's but needed constant cleaning so decided to build an airbox for it Here's my first attempt at aluminium welding back then 100_1267.jpg 100_1566.jpg 100_1567.jpg 100_1570.jpg 100_1574.jpg 100_1580.jpg Now it had to have an unseen top that goes in the tank cavity with the unifilter stack on it, had to be built in two bits to assemble it in there. 100_1586.jpg 100_1587.jpg Then made a hole in the bottom piece 100_1588.jpg 100_1589.jpg 100_1590.jpg It still doesn't look bad on the bike even now,yes I still own it IMG_0153.jpg IMG_0154.jpg And boy did I learn some stuff ,I'm a little better at it now ,thumbs up if you can guess the bike 100_2418.jpg
__________________
"There's a reason pain stands out in sprayPAINting" Pat the panel beater |
Thread Tools | Search this Thread |
Display Modes | |
|
|