#11
|
|||
|
|||
Quote:
Accurately shown, the non-worked area looks more like this: H1 Wingroot 5 copy.jpg You can see how I have abbreviated the X across the panel, though the shape still goes from corner to corner. H1 Wingroot 6 copy.jpg But the shape follows as though the X were marked out there. The oval is drawn as a reversed version here, which more accurately maps the real area - but is a hard geometry for me to describe to you using only words. One finger fit, wingroot fairing copy.jpg The shape is more complex than what you face, but the relative geometry is the same - with yours having less shaping rather than more, but the overall "reverse" is shaped in the same approach: with two opposite sides stretched "up" and the other two opposite sides stretched "down."
__________________
Kent http://www.tinmantech.com "All it takes is a little practical experience to blow the he!! out of a perfectly good theory." --- Lloyd Rosenquist, charter member AWS, 1919. Last edited by crystallographic; 09-15-2015 at 10:22 PM. |
Thread Tools | Search this Thread |
Display Modes | |
|
|