All MetalShaping

Go Back   All MetalShaping > General Metal Shaping Discussion > Events
  Today's Posts Posts for Last 7 Days Posts for Last 14 Days  

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 08-04-2018, 10:58 AM
Steve_Greenway's Avatar
Steve_Greenway Steve_Greenway is offline
Member
 
Join Date: May 2012
Location: Cumberland, WI
Posts: 210
Default Metalshaping in the North Woods 2018

I will be hosting the North Woods Metalshaping meet again this year on October 4th, 5th and 6th at my shop in Cumberland, WI. Similar to past years, the focus will be on making and repairing panels primarily using hand tools.

We probably have space for around 25 people in total.

If you'd like to attend, please respond to this post, or send me a PM. Let me know what days and if you are bringing a larger project.

Here is a link that shows photos from last year http://www.allmetalshaping.com/showthread.php?t=16900
------------------------------------------------------------------
I believe Pat Brubaker will be here offering a class or two prior to the meet. Details on that should be available soon.
__________________
Steve Greenway
Reply With Quote
  #2  
Old 08-04-2018, 05:00 PM
billfunk29 billfunk29 is offline
Member
 
Join Date: Oct 2013
Location: Minnesota
Posts: 319
Default North woods 2018

Count me in. Hopefully for more than just one day this year.
__________________
Bill Funk
Reply With Quote
  #3  
Old 08-05-2018, 10:20 PM
61unibody 61unibody is offline
Member
 
Join Date: Apr 2015
Location: Upper East Angelo, Wi
Posts: 37
Default

I'm planning to be there again this year.....
__________________
Dane

Ea. Angelo Metalworks
Reply With Quote
  #4  
Old 08-07-2018, 12:41 AM
jdrax jdrax is offline
Member
 
Join Date: Dec 2011
Location: Pittsville, Wisconsin
Posts: 38
Default

Count the Draxlers in for 3
__________________
John R. Draxler
Pittsville, Wisconsin
center of the state
Reply With Quote
  #5  
Old 08-07-2018, 01:41 PM
Steve_Greenway's Avatar
Steve_Greenway Steve_Greenway is offline
Member
 
Join Date: May 2012
Location: Cumberland, WI
Posts: 210
Default Attendee List

I'll edit this post as time goes by and try to keep it current. Here is who I THINK is attending. Let me know if you see a discrepancy.

1. Pat Brubaker
2. Mike Clarahan (Motage)
3. Bill Funk
4. Dane West
5. Paul Nygren
6. Mick Vollmar
7. John Draxler Sr.
8. John Draxler Jr.
9. Jimi (Draxler group)
10. Drew Schumann
11. Dale LaRue
12. Jeff (Sandmanred)
13. Chris Fleming
14. Chris Cooper
15. Eric Hokensen
16. Brock Shimon (large project)
17. Pat (Dale's friend)

The following are people that indicated that they hoped to attend, quite a while ago. If your name is here please confirm one way or the other.

18. Henry Votel
19. Shawn O'Harrow (trying to arrange schedule.)

Plenty of room for more people, let me know if you are interested.

I am about full for large projects, if you were hoping to bring something large, please let me know.
__________________
Steve Greenway

Last edited by Steve_Greenway; 09-25-2018 at 02:13 PM.
Reply With Quote
  #6  
Old 08-07-2018, 01:53 PM
Steve_Greenway's Avatar
Steve_Greenway Steve_Greenway is offline
Member
 
Join Date: May 2012
Location: Cumberland, WI
Posts: 210
Default Hotel in Cumberland

Some of you that attended in previous years stayed at the Cumberland Inn and Suites. It has been sold and is now the AmeriVu Inn and Suites - Cumberland The phone is unchanged at (715) 822-5655. At least online, the rates appear a bit lower than before.
__________________
Steve Greenway
Reply With Quote
  #7  
Old 08-08-2018, 01:05 PM
dschumann dschumann is offline
Member
 
Join Date: Jun 2016
Location: Iowa
Posts: 68
Default

Count me in!

I was looking for an event to come to this fall.

Drew
__________________
Drew Schumann
Reply With Quote
  #8  
Old 08-12-2018, 08:51 PM
Steve_Greenway's Avatar
Steve_Greenway Steve_Greenway is offline
Member
 
Join Date: May 2012
Location: Cumberland, WI
Posts: 210
Default Body Sweeps

Some of you probably remember I demonstrated how to make body sweeps using a method developed by Mike Rouse, at the meet in 2016. I can set the router table up for this again if there is an interest.

If anyone wants to make a custom sweep, or even make a small set of standard sweeps, everything will be setup for it, just bring some blanks to cut them from. I use 1/8" hardboard blanks (also called Masonite by some) You can use other materials if you prefer. Let me know if you are interested and we can work out the details.
__________________
Steve Greenway
Reply With Quote
  #9  
Old 08-30-2018, 10:09 PM
Steve_Greenway's Avatar
Steve_Greenway Steve_Greenway is offline
Member
 
Join Date: May 2012
Location: Cumberland, WI
Posts: 210
Default

I updated the attendee list in posting #5 above. Looks like we will have a good group this year. Most of the previous attendees will be back, and we've got several new faces as well.
__________________
Steve Greenway
Reply With Quote
  #10  
Old 09-04-2018, 10:43 AM
Steve_Greenway's Avatar
Steve_Greenway Steve_Greenway is offline
Member
 
Join Date: May 2012
Location: Cumberland, WI
Posts: 210
Default Patman's Classes

Here is a link to the info on Pat's classes for this year.
http://www.allmetalshaping.com/showthread.php?t=18276
__________________
Steve Greenway
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 05:50 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.