#1
|
|||
|
|||
Who in southern Oregon can shrink some 12ga steel
I just need some simple fenders made
They are 11" wide with a 1" return/fold at the edges. Total flat width before folding is 13" The front 40" is flat and the back end, approx 21" is curved down at an approx 18" radius. Overall length flat and edges folded is approx 62" So geting the piece cut and edges folded is no prob...its the bending and radiusing the back end where the work is.. Any suggestions on who in central to southern Oregon can do this? Tried Grubb, he wont work on steel that thick. Thanks guys, All suggestions appreciated
__________________
Roland |
#2
|
|||
|
|||
Quote:
Sorry to be more South than you are - Nevada City, CA. Otherwise, yup.
__________________
Kent http://www.tinmantech.com "All it takes is a little practical experience to blow the he!! out of a perfectly good theory." --- Lloyd Rosenquist, charter member AWS, 1919. |
Thread Tools | Search this Thread |
Display Modes | |
|
|