|
|
Thread Tools | Search this Thread | Display Modes |
#1
|
|||
|
|||
Ironworker Bottom Dies, Die Sets, Scotchman, Edwards, Piranha, Baileigh
Ironworker bottom dies, here's what dies I have:
- Slot die: Width = .187" Length of slot = .385" - Slot die: Width = .260" Length of slot = .387" - Slot die: Width = .293" Length of slot = .575" - Slot die: Width = .262" Length of slot = .385" - Round die with notch: Hole Diameter = .580" Notch width = .104" - Round die with notch: Hole Diameter = .505" Notch width = broken off - Square die: .638" square - Round die: Hole diameter: .095" - Round die: Hole diameter: .451" - Round die: Hole diameter: .324" - Round die: Hole diameter: .246" - Round die: Hole diameter: .230" - Round die: Hole diameter: .262" - Round die: Hole diameter: .142" IW 1.jpg IW 2.jpg IW 3.jpg IW 4.jpg IW 5.jpg IW 6.jpg IW 7.jpg $150.00 for everything, I will not separate What you see in the pictures is what you get! Thanks for looking!
__________________
Matt |
#2
|
|||
|
|||
These dies are 1.375" diameter
Make me an offer
__________________
Matt |
#3
|
|||
|
|||
Where in Wisconsin are you located? Do you have the punches that go with the dies?
__________________
Don Papenburg |
#4
|
|||
|
|||
I only have the bottom dies as you see in the pictures
__________________
Matt |
Thread Tools | Search this Thread |
Display Modes | |
|
|