|
#1
|
|||
|
|||
About time!!
After dealing with a few health problems, the guy filming and editing my N/10 dvd is finally ready and glad to get back to work
So I would like to announce that dvd N 10 from the ''handbuilt'' series is going to be ready from the 29 of this month..... and soon after that... N 11 will be ready as well The dvd N 10 is about hot shrinking panel that are been stretched. Panel beating by using hammer and dolly (on dolly /off dolly) flipper work (slapper) and file finishing. N 11 will be all about using the English wheel..... ( pressure, which anvils to use for particular jobs, how to take out a high spot, lumps, waves, smoothing and more )They will be made in NTSC and Pal version. Peter
__________________
P.Tommasini Metalshaping tools and dvds www.handbuilt.net.au Metalshaping clip on youtube http://www.youtube.com/watch?v=WEAh91hodPg Making Monaro Quarter panel: http://www.youtube.com/watch?v=KIpOhz0uGRM |
#2
|
|||
|
|||
If these videos are as well done and present such good ideas as his first set, I want to get first in line to get a copy.
Peter: When they are available, how can we acquire copies?
__________________
Will |
#3
|
|||
|
|||
Quote:
Simply send me an email and order them. Peter
__________________
P.Tommasini Metalshaping tools and dvds www.handbuilt.net.au Metalshaping clip on youtube http://www.youtube.com/watch?v=WEAh91hodPg Making Monaro Quarter panel: http://www.youtube.com/watch?v=KIpOhz0uGRM |
#4
|
|||
|
|||
Excellent! I'll be ordering 10 and 11
|
Thread Tools | Search this Thread |
Display Modes | |
|
|