|
#1
|
|||
|
|||
Understanding curves and radii
Hello--very basic question from a rookie. Is there a resource out there that discusses curves, radii, reverse curves, etc in terms of metal shaping? Thanks!
__________________
Kris |
#2
|
|||
|
|||
Hi,
Bill Longyard is a member here with the group. He has writen several metal shaping books that cover your questions quite well. His books can be found with a Internet search. Hope it helps, Bill
__________________
Bill Tromblay "A sign of a good machinist, is one who can fix his F$@& Ups" My mentor and friend, Gil Zietz Micro Metric Machine. |
#3
|
|||
|
|||
Radii, etc. - See "Advanced Search"
Quote:
You have terms that will match the content of this site, and there are a lot of resources on these and many other topics. Click Search and Show Posts Enter the word you have the most interest in to start. The click Go. The results will get you more to read than you expected. As you read, you will find members whose posts 'click', or 'make sense'. I am still reading myself and have nothing else to offer.
__________________
Rick in Washington, USA Here to quietly observe and learn. |
#4
|
|||
|
|||
I've found that the more I read the more I understand. There is no one source of information that answers all your questions. I find that after I've read everything I can find, reading things a second or third time helps me to understand.
Norm
__________________
Norm Henderson |
Thread Tools | Search this Thread |
Display Modes | |
|
|