> Need to re-locate my shop. - All MetalShaping <
All MetalShaping

Go Back   All MetalShaping > General Metal Shaping Discussion > General Discussion
  Today's Posts Posts for Last 7 Days Posts for Last 14 Days  

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 02-10-2018, 12:44 PM
racer-john's Avatar
racer-john racer-john is offline
Member
 
Join Date: Mar 2010
Location: Shop is in "Asnorveldt"( the "Marsh"), Ontario, Canada
Posts: 206
Default Need to re-locate my shop.

If this is the wrong place for it, please move it.

I have just been told that the new owner will want the garage on March 1.

I have a small hobby shop, jamb packed, 900 sq.ft., that I have to move out of soon.
It is located in the north east corner of King Twp, ON, Canada
Don't need hydro, heat or water. Looking for similar size or 1000 sq.ft.
in area of Newmarket, Bradford , Holland Landing.

Any help would be appreciated.

Thanks
__________________
John S. Evelyn .

_________________________________________________
Torque is nothing, unless you can get it to the road.
Reply With Quote
  #2  
Old 02-10-2018, 05:24 PM
Chris_Hamilton Chris_Hamilton is offline
Member
 
Join Date: Jan 2013
Location: Southisde Virginia
Posts: 68
Default

You probably already know this but Craigslist would be the place to start.

https://geo.craigslist.org/iso/ca/on
__________________
Chris (trying to be the best me I can be)
Reply With Quote
  #3  
Old 02-11-2018, 04:40 PM
racer-john's Avatar
racer-john racer-john is offline
Member
 
Join Date: Mar 2010
Location: Shop is in "Asnorveldt"( the "Marsh"), Ontario, Canada
Posts: 206
Default Need to re-locate my shop.

Thanks Chris. None of the headings produced a glimmer of hope.
__________________
John S. Evelyn .

_________________________________________________
Torque is nothing, unless you can get it to the road.
Reply With Quote
  #4  
Old 02-11-2018, 10:56 PM
Chris_Hamilton Chris_Hamilton is offline
Member
 
Join Date: Jan 2013
Location: Southisde Virginia
Posts: 68
Default

John, try posting a shop space wanted ad on Craigslist in your area (York Region??). It's free and you may find someone who will have a place available or who wants to sublet some shop space. Sucks losing your shop, hope you find something.
__________________
Chris (trying to be the best me I can be)
Reply With Quote
  #5  
Old 02-12-2018, 09:52 PM
Mr fixit Mr fixit is offline
Member
 
Join Date: Aug 2014
Location: Portland, Oregon
Posts: 45
Default

John,

When I had to move my shop of a similar size but the new one wasn't ready I rented 2 shipping containers for dry storage until the new shop was finished. since the clock is ticking you might look at them for a temp solution until you find the shop that you really want vs jumping at the first that pops up.

Just an opinion best of luck!

TX
__________________
Mr fixit for the family
Chris
Reply With Quote
  #6  
Old 02-12-2018, 10:20 PM
Pokie's Avatar
Pokie Pokie is offline
Member
 
Join Date: Feb 2014
Location: Fort Collins, CO
Posts: 104
Default moving shop

I had the same problem a few years back. I put everything into one of those storage units for a couple of months until I was able to find a space. Yes, it's a pain to move everything twice but it was better than the risk of losing anything by moving at the last minute.

Good luck!
__________________
http://pokiespages.com/
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 04:02 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.