#1
|
||||
|
||||
Welding a Mini Cooper roof section to a 48 Anglia
I have decided to use a mini cooper donor section to fill the roof on my 48 Anglia. This appears to be the least complicated approach of the two choices I had based on my level of experience. I found a picture of a Anglia being fitted with a mini roof. I have a few questions looking at the photo.
#1 How do you cut the corner of the mini roof when you have a much narrower roof in the front as shown in the photo? #2. Once you have the mini roof laid out how do you go about cutting the Anglia roof to match so you can weld it? I need to understand the correct procedure before I get to this point. Roof panel.jpg Roof panel #4.jpg
__________________
John a.k.a. Mav Last edited by maverick5582; 09-16-2017 at 12:05 PM. |
Thread Tools | Search this Thread |
Display Modes | |
|
|