#11
|
|||
|
|||
we try last year to work with this dustless blasting, there is a verry of different products out, and most used on buildings, or industry
we test first a normal sandblaster with a waterjet mounted on, result is good positiv is you have never dirt inside car Body, if all holes ar open, you wash all dirt out with this, so not much work to clean after, rust, boddyfiller, wax, sealer, all you can sand with this, also not big demages around on glass or ruber, not so abressive than other materials, but after drying you can use it a second time, not like other you must put away after work with negativ,...is is a wet and dirty way to sand, Inhibitor is not Inhibitor, you must find the right material, and Inhibitor is not in each Country cheap,.....here it is expensive, but working well, you have between 2-5 days time to spray Metall after it will rust a Little what i find in net http://www.dustlessblasting.com/products.html all my Infos i get from this hp, also mouvis to look on and some good Infos about this,..... for me it works perfekt ernst
__________________
Just Ernst Last edited by Just; 01-05-2015 at 01:05 PM. |
#12
|
|||
|
|||
I found someone here in Atlanta who does this work. I'm going to give them a shot at cleaning up some Aeronca tail surfaces I have. I'm going to have them clean up a "throwaway" part before I turn 'em loose on a usable one...
Hope this works, because it'll be a faster, cheaper solution than a combination of bead blasting and chemical stripping...
__________________
Kyle Boatright Atlanta, GA |
#13
|
||||
|
||||
From my phone calls yesterday to hire a unit in the UK is a no no, it would appear that mainly commercial cleaning companies use them for contract work. I did get a price from one hire company tied into 2 week hire at £1000/wk so wont be going that route, am waiting for a mobile guy to come back and will report how that goes, perhaps if I search for vapour blasting I might have different results. This occurred to after chatting to a hire company when he said it was relatively new as it's patent had expired.
__________________
Tom Poulter Follow the Dream - Sideways - - But don't fall-off the edge 'good to know you guys care' https://ctrestorations.com/ |
Thread Tools | Search this Thread |
Display Modes | |
|
|