All MetalShaping

Go Back   All MetalShaping > Miscellaneous stuff you need to know > Announcements
  Today's Posts Posts for Last 7 Days Posts for Last 14 Days  

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 02-10-2011, 09:58 AM
Operations Team Operations Team is offline
Super Moderator
 
Join Date: May 2009
Posts: 41
Default Notice to new members and zero posters!

This announcement only concerns folks who are Registering Now or those that registered in the past and have ZERO posts. If this is you, it would be best if you keep reading. If that is not you, you can stop reading now.

Most everyone knows, or should know, that we have implemented a new two tier membership program.

Guests AND initial members can only see a portion of the site. Initial members can only make moderated posts in the Introduction forum. Once an initial member completes their profile information, signature (REAL NAME) and does an introduction, they are given full member status with access to the full site.

New registrations will have 3 days to respond to the email sent as part of the registration process. If you do not respond to the email your registration request will be deleted. If you don't receive an email contact us and let us know.

Effective immediately, initial members and all CURRENT ZERO posters will be given 7 days to complete the membership process by doing an introduction, filling out their profile information and signature (REAL NAME) in the "User CP" as described in the " How to join AllMetalShaping and why you may not be able to see everything" thread:

http://www.allmetalshaping.com/showthread.php?t=2173

Folks who do not complete this will have their memberships removed. It will be no real hardship because as a guest, you have the exact same ability to see the same portions of the site as an initial member does. Plus you won't have to bother with logging in.

Basically, if you don't intend to complete the membership requirements, just save yourself the trouble and don't bother registering.

Some of you will no doubt wonder why we are doing this? There are several reasons:

1- We want to reduce spammers and control who has access to the information that has been posted by our members. We check every new member for spammers, email harvesters, and other suspicious behavior.

2- We want to know who we are talking to which is the requirement for a REAL NAME in the signature.

3- We want to know your general location.

4- We would like to have our membership number be as close as possible to active members. We don't charge for advertisements and we have no need for meaningless membership numbers.

We hope that many of you with ZERO Posts will complete the process and become active members in the community.
__________________
Johnny Ariel
Kerry Pinkerton
Joe Hartson
Tim Doty
Dan Pate
Steve Hamilton
Reply With Quote
  #2  
Old 03-01-2011, 08:12 PM
Joe Hartson's Avatar
Joe Hartson Joe Hartson is offline
Administrator
 
Join Date: May 2009
Location: Pass Christian, MS
Posts: 4,981
Default

Please read the complete instructions and follow them if you want to become a member and have access to the complete site. Several of the new registrations have been incomplete or incorrect. We require a real name in the signature to be approved. If you are not willing to provide a real sounding name don't bother registering because you will not be approved. Happy painter, Metal shaper, Big Dog, etc are not acceptable. Larry, James, Bob, etc are acceptable. We also want to know a little about you, this helps us weed out spammers and other undesirables. "Hi, I'm new here" is not an introduction.

We have also had some recent contacts that said they received an email saying they are spammers. They say they are not and that is possible. The software we use to check registration has a large data base of reported spammers. If you Internet Provider uses a dynamic IP address, meaning that you get a new IP address each time you log on, there is a chance that the IP address assigned was used by a spammer at one time. If you get an email saying you are a spammer, log off and log back on and try registering again. The spammer email has nothing to do with you screen name or your email address it is the IP address assigned by your provider. The email is sent by the software automatically.

Thanks
__________________
Joe Hartson

There is more than one way to go to town and they are all correct.
Reply With Quote
  #3  
Old 03-11-2011, 09:02 PM
Joe Hartson's Avatar
Joe Hartson Joe Hartson is offline
Administrator
 
Join Date: May 2009
Location: Pass Christian, MS
Posts: 4,981
Default

Bump to the top
__________________
Joe Hartson

There is more than one way to go to town and they are all correct.
Reply With Quote
  #4  
Old 03-12-2011, 11:02 PM
Joe Hartson's Avatar
Joe Hartson Joe Hartson is offline
Administrator
 
Join Date: May 2009
Location: Pass Christian, MS
Posts: 4,981
Default

This is the last bump. We will start deleting memberships that have not completed the registration process. If you want to be a member and have complete access to the site please complete your registration. Thanks.
__________________
Joe Hartson

There is more than one way to go to town and they are all correct.
Reply With Quote
  #5  
Old 04-24-2011, 09:05 PM
errolbeazley errolbeazley is offline
Member
 
Join Date: Apr 2011
Location: wagga wagga nsw australia
Posts: 6
Default how do i

how do i find this month's shape info i can the picture not the rest can sum one pont me in the right site
__________________
errol
Reply With Quote
  #6  
Old 04-24-2011, 09:09 PM
Kerry Pinkerton's Avatar
Kerry Pinkerton Kerry Pinkerton is offline
Administrator
 
Join Date: May 2009
Location: Near Huntsville, Alabama. Just south of the Tennessee line off I65
Posts: 8,321
Default

Just click on the photo.

Or this is the link for Mark: http://allmetalshaping.com/showthread.php?t=3011
__________________
Kerry Pinkerton
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 07:18 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.