> Console Fabrication - Page 3 - All MetalShaping <
All MetalShaping

Go Back   All MetalShaping > Metal Shaping Projects > Automotive Projects
  Today's Posts Posts for Last 7 Days Posts for Last 14 Days  

Reply
 
Thread Tools Search this Thread Display Modes
  #21  
Old 01-08-2018, 08:59 AM
Mike Motage Mike Motage is offline
MetalShaper of the Month Oct 2016
 
Join Date: Nov 2012
Location: S.E.Michigan
Posts: 550
Default

I especially like showing your approach to the corner joggles.

Thanks for showing!
__________________
Mike
Reply With Quote
  #22  
Old 01-08-2018, 04:19 PM
Oldnek Oldnek is offline
Member
 
Join Date: Mar 2011
Location: Ulladulla, Australia
Posts: 1,246
Default

beautiful work as usual Robert, the console is a great piece and looks period for the car. Nice work.
__________________
John
EK Holden V8
Reply With Quote
  #23  
Old 01-13-2018, 09:23 PM
MP&C's Avatar
MP&C MP&C is offline
MetalShaper of the month 02-11
 
Join Date: Mar 2010
Location: Leonardtown, MD
Posts: 1,150
Default

Thanks for the comments!


We were originally going to hinge the console lid along the passenger side, but thought it would be better accessible from either front seat if it was hinged at the rear. We're using the same hinge as we used for the widened glove box door. In our attempt to add a torsion spring to keep the lid upright in the open position, we couldn't find the size to fit our 1/8" diameter hinge pin with enough torsion to hold the lid open. (Yes, even McMaster failed us) So we decided to wrap our own. Here's a fixture we made for the Aloris tool holder on the South Bend to act as a guide for the 1/16" music wire.



We also installed the older 3 jaw chuck, but not before adding a "wire catch"



Here's a video of us wrapping the spring... As my South Bend lacks slow enough speed for such a task, we opted for manual rotation..


https://www.youtube.com/watch?v=OvJAIk1-Cs4


Here's the positioning and function of the hinge with torsion spring installed...


https://www.youtube.com/watch?v=QPPY2dVOzmQ


With our hinge now positioned, we also found we needed to move the hinge closer to the rear edge for better lid clearance while open. Back up and punt you say?

__________________
Robert

Instagram @ mccartney_paint_and_custom
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

All times are GMT -5. The time now is 01:55 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.