All MetalShaping

All MetalShaping (https://allmetalshaping.com/index.php)
-   Basic questions and answers (https://allmetalshaping.com/forumdisplay.php?f=13)
-   -   Source for 19g steel in MN (https://allmetalshaping.com/showthread.php?t=19048)

sandmanred 05-28-2019 05:29 AM

Source for 19g steel in MN
 
A buddy is going to need about 8 square feet of mild steel in small pieces for a motorcycle exhaust. After welding some 20g and bending some 18g I'm thinking 19g would be a good compromise. I've only used Discount Steel and they don't seem to carry it. Any suggestions on sourcing small quantities of 19g mild steel in the Twin Cities area?

Tom Fritz 05-28-2019 07:24 AM

Dan Pate. #1-507-263-7411 or 612-490-1967

Dennison MN.
down by Cannon Falls.
He has 19 cold roll sheet and 19 deep draw sheet.


All times are GMT -5. The time now is 02:22 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.