All MetalShaping - Hello from Brisbane Australia

All MetalShaping (https://allmetalshaping.com/index.php)

- Introductions (https://allmetalshaping.com/forumdisplay.php?f=7)

- - Hello from Brisbane Australia (https://allmetalshaping.com/showthread.php?t=10143)

Xauterus

11-24-2013 03:19 AM

Hello from Brisbane Australia

Hello I am Corey,
I am rebuilding a couple of Ford F250's and a locally built 1972 Ford Falcon utility, similar to a Ranchero. All are prone to rust and are hard to find parts for, especially the F trucks. I would like to be able to properly create the sheet metal required to fix the rust permanently.

Thanks
Corey

Peter Tommasini

11-24-2013 04:01 AM

Hi Corey welcome to the forum
Peter

HEATNBEAT

11-24-2013 11:06 AM

Hi Corey and welcome!:)

steve.murphy

11-24-2013 08:48 PM

Hi Corey, welcome.

Xauterus

11-25-2013 07:38 AM

Thank you. I hope I can learn some of the fine skills on this forum.

www.kustomgarage.com.au

11-25-2013 08:16 AM

welcome Corey!!

All times are GMT -5. The time now is 10:55 PM.