All MetalShaping

All MetalShaping (https://allmetalshaping.com/index.php)
-   Introductions (https://allmetalshaping.com/forumdisplay.php?f=7)
-   -   Hello from Sealand! (https://allmetalshaping.com/showthread.php?t=12702)

Senno90 12-02-2014 03:11 AM

Hello from Sealand!
 
Not the new one, but the original one! Which is located in the Netherlands.
I'm Alessandro or Senno90 (90 stands for my production date). Currently working a job which doesn't require much creativity or craftsmanship which is why I plan on leaving it soon. To do so I plan on learning a lot from this forum and hopefully become skilled enough to work in a classic bodyshop (already have welding certificate but guys here won't let me weld much on cars :mad:)

I've already seen some metalwork in the section which can be seen as a guest and my desire to make a living of this has become even greater!;)
The tools that are available for metalwork here are usually a bit unprofessional so I plan on making and english wheel and planishing hammer setup myself. That will probably be my first thread in a couple of weeks. That will be all for now. Thanks :)

Alessandro

RockHillWill 12-02-2014 07:36 AM

Good morning Senno, welcome to the site.

Oldnek 12-02-2014 07:38 AM

Hello Senno and Welcome.:)
Cheers John

David Gardiner 12-10-2014 06:14 PM

When I saw the title I had to read this. I can see Sealand (the new one) from my workshop and from near my house. I would have been amazed if it was someone from there.

Welcome to the forum Senno.

David

Peter Tommasini 12-10-2014 06:26 PM

Hi Senno welcome to the forum
Peter

David Gardiner 12-11-2014 02:59 AM

The new Sealand,

http://en.m.wikipedia.org/wiki/Princ...ealand-sky.jpg

I think that's what you were referring to.

David


All times are GMT -5. The time now is 11:14 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.