Newb Fabrication Guy
 

Working on cleaning up rust and some panel reshaping on a 76 Mazda RX3. Engineer by trade, after hours I install aftermarket efi ecu's and tune cars. Have always done quite a bit of my own fabrication and thought I would join the group for pointers.

Thanks
Ryan Fritts

Hi Ryan welcome to the forum
Peter

Hi Ryan and Welcome.:)

Those little RX3 are a great car, as well as R100, RX2 and RX4's.
Here in OZ they are all worth a goldmine now, as they are getting harder to find.
The R100's are even rarer, with some fetching up to 25k for pretty average ones.:eek:

Good Luck with yours, as there is a lot to learn from this site.

Cheers John

Hello Ryan and welcome to the site.

Jere