All MetalShaping

All MetalShaping (https://allmetalshaping.com/index.php)
-   Introductions (https://allmetalshaping.com/forumdisplay.php?f=7)
-   -   Old car guy - metal shaping newbie (https://allmetalshaping.com/showthread.php?t=17276)

Pupcreek 10-31-2017 08:06 PM
Old car guy - metal shaping newbie
 
I have been around cars my entire life; engine work, body work, paint & modifications etc. With that I have not created any shaped metal part from scratch other than in a milling machine. I have a frame with suspension, engine, trans and brakes but no body. Very ambitious... but I would like to design and fabricate my own body. I can TIG so joining panels is doable. Here to learn.

Ed

Peter Tommasini 11-01-2017 07:25 AM
Hi Ed
Welcome to the forum
Peter

crystallographic 11-02-2017 12:36 PM
Quote:
Originally Posted by Pupcreek (Post 140777)
I have been around cars my entire life; engine work, body work, paint & modifications etc. With that I have not created any shaped metal part from scratch other than in a milling machine. I have a frame with suspension, engine, trans and brakes but no body. Very ambitious... but I would like to design and fabricate my own body. I can TIG so joining panels is doable. Here to learn.

Ed
Hi Ed,
Welcome to the forum.


All times are GMT -5. The time now is 10:28 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.