Introduction Profile
 

My name is Tyler Henning and I have been metal shaping as a hobby for roughly four years. I'm constantly making dies on my pullmax, playing with the planishing hammer I made myself or wheeling on the english wheel I built in school. I found this site and thought it seemed interesting, so here I am.

Hi Tyler welcome to the forum
Peter

Introduction Profile Reply
 

Hello Peter,

Thanks for taking a look at it. When I bought the pullmax it originally came from England and was 440 3 phase 50 hz with only the off-setting lower dies. Dad and I pulled that motor, machined a spacer for $6 at college and now we have a usable pullmax. We don't have a lathe or mill, so we do a lot of kirksite castings.